V-Carve milling bit with nose pad return

Use for manufacturing glasses in cellulose acetate, wood and horn.

Milling cutter to create the bevel on the acetate, wood or horn frame

The cutter has a specific profile allowing the arched return of the inserts towards the inside of the circle.

Depth of bezel: 0.75mm - 102°

Maximum height from frame to pads: 12mm

ø of the fixing shank: 8mm

ø at bottom of bezel: 8.7mm

Return camber: 1.5mm

This cutter is reserved for professional use for mass production.

A fusion360 programming example is provided with each command to better understand its use.