CNC Hobby XK-900-PRO
Our vision of the Hobbyist CNC
Kit DIY or Assembly by us
SEND IN 24H
Machine controlled either by the X-COMMAND console or by Mach3 (PC required)
Modèle présenté : XK-600-PRO + XYZ Servo + Broche ATC
MAX Servo Control
Accessoires optionnels :
Palpeur de Fraise - MAGASIN OUTILS - Etau
Ball screw ø16mm in high quality steel | Class C1 & 20mm Linear Guides on High Precision Ball Cage
Receive the machine in a KIT to assemble yourself or completely assembled.
If you feel like an assembler, you will receive the mechanical part of the machine in two parts
(The lower tray completely assembled and separately the upper gantry to be fixed on the lower mobile carriage)
Then all you have to do is place the wiring and the various electronic elements ordered.
All accessories, wires, screws, etc. are included so that you can easily assemble them.
You can choose in the kit not to order certain elements that you would have already (or ordered elsewhere)
Whatever the kit, electromagnetic XYZ referencing sensors are provided.
All shielded cables and connectors are provided.
Even as a kit, the machine is delivered pre-assembled in two parts, pre-adjusted with all the necessary hardware.
All that remains is to assemble the gantry on the frame. The machine will be mechanically assembled.
LeLess motors and electronics are delivered in a separate package with the cables and everything necessary.
All our kits include the XYZ limit stops used for referencing the origin by electromagnetic contactor.
(Registration accuracy, in high precision mode and re-positioning ±0.002mm - 0.01mm in standard registration mode)
Non-contact origin search
With the order of the kit, you will have access to a series of videos on Youtube to help you in the different stages of assembly and wiring.
No need to be an experienced electronics technician, just follow the steps.
A machine is assembled in about 8 hours.
We also offer you 4 hours of tele-assistance to answer any questions you may have.
Only machines with conventional stepper motors are available as a kit.
The sets with ServoMotors being more complex in the adjustment and the technical installation are assembled by us.
We have a period of 2 weeks to assemble and adjust the machine according to the characteristics ordered.
Machine assembled mechanically in less than 30 min
It remains to carry out the wiring with method, with the shielded wires provided.
Kit delivered in two separate parts.
The lower X carriage as well as the upper Y and Z carriages are already preset.
Kit delivered in two separate parts.
The lower X carriage as well as the upper Y and Z carriages
are already preset.
|BALL SCREW||ø 16mm x 5mm - Acier|
|Réf XYZ||Capteur Electromagnétique sur chaque axe en fin de course|
|Bare machine weight||105 Kg|
• COMPOSE YOUR MACHINE ON REQUEST
CHOICE OF XYZ FEED MOTORS
CLOSED LOOP SERVO MOTOR 48v - 5nm
The professional solution!
Technology derived from industrial CNCs.
A controller placed on the motor analyzes in real time the need for torque, and the position on the axis and automatically regulates the intensity of the signals, as well as the position requested.
No loss of steps possible.
Travel speeds up to 10,000mm/min allowing high-speed machining
Highly recommended for CNCs with tool changers and 600 & 900mm machines
These motors require our specific controller "MAX-SERVO-CONTROL"
You cannot order a kit assembly machine with these motors.
You can equip our CNC with any type of spindle.
We distribute two 2.200w spindles with liquid or ventilated cooling.
Spindle 400HZ 2200w 24.0000 Turns Min.
Collet Holder ER20
The easiest to assemble.
Strongly discouraged in metalworking
Spindle 400HZ 2200w 24.0000 Min Turns
Collet Holder ER20
Ideal for long machining, the spindle is cooled by a liquid passing through it.
For kit assembly, you will need to use a cooling system:
Spindle with automatic tool change
2000w 24,000 min rpm ISO20
The spindle head is hollow with a pneumatic tie rod system, allowing the cutter holders to be interchanged.
The tools are with an IS020 Base cone.
Spindle with liquid cooling.
The PC Gamer type liquid cooling kit is integrated to be positioned on the back of the portico. .
You can directly buy some conical ISO20 cutters. or go through ISO20-ER16 milling doors
Our Mach3 solution makes it possible to manage up to 10 locations in a magazine with Horizontal or Vertical loading, the cutters beyond the number 10 will be requested in 'manual' mode, that is to say that the machine puts itself in pose during the machining requires the next cutter, you expel the current cutter holder by pressing a button on the screen and place the new one....
The number of strawberries possible even in ATC is therefore much higher than the only 10 present in the store ....
For more space on the worktop, you can remove the tool magazine (and only work with cutters referenced from 11....
Our spindles are assembled with a frame imported from Asia, and wound in Hungary according to our specifications. 24 months warranty.
The system with X-Change tool changer is deposited.
The warranty does not cover machining on metal for the air-ventilated spindle
The warranty does not cover starting without the presence of a cutter holder in the spindle with tool changer. (Software protection to prevent dry start)
CHOICE OF CNC CONTROLLER: (facultatif)
If you already have a CNC controller corresponding to the machine ordered, simply connect it to your new machine.
We offer 3 types of control:
Takes its name from its cubic appearance.
Designed by us with reliable, proven and interference-free electronics.
Fully assembled in Spain by us
A compendium of technology in a small space? with optimal and silent ventilation.
The cube integrates all the control management of your CNC on 3 Axes.
(easily expandable for a fourth axis)
Controls of stepper motors, cutter feeler, part tracker (EDGE FINDER) ...
Not compatible with servo motor models
Internal USB controller -
Control of X YZ Axes for 24v 5A - 120w stepper motors
Spindle motor phase dimmer up to 2.200w TRI 220v
Emergency stop button on the box
Reading of the 3 referencing sensors on the XYZ axes (HAALL-effect (electromagnetic contactors)
Strawberry height probe reading (Three-contact plug: +24 - Ground - Signal)
To connect to your PC under Windows XP, WINDOW 10 or Window 11 via USB
The Box is closed and sealed cannot be modified by you without loss of warranty
220v 50Hz - 12A
Net weight: 4Kg
CNC input/output connectors by DIN plugs
CUBO <-> PC connection. via 1GB Ethernet or USB 2.0
Disponible en accessoires :
We disclaim all liability and provide no technical assistance for parts installed on the machine which we would not be the supplier. (Purchase of a spindle, advance motors on other websites,...)
- Tray surface